Pure PTFE sheets are molded, skived or cut from 100% virgin PTFE.
It has the best chemical corrosion resistance among known plastics,
electrical insulation, and lowest friction coefficient. It is used
as sealing material, electrical insulating part, lining pad etc.
BKT1102A - Skived PTFE Sheet
Virgin PTFE resin is firstly molded into a blank rod, and then
skived into sheet. PTFE sheets with thickness of 3mm or less are
generally manufactured in this way.
Generally Size: Thick: 0.5~3mm; Width: 900mm, 1000mm, 1200mm;
Length: ≥ 200mm.
BKT1102b -- Molded PTFE Sheet
PTFE sheets with thickness over 3mm are normally manufactured by
Thick: 1~30mm; Width: 150mm~ 2000mm; Length: 150mm~ 2000mm.
BKT1102c -- Modified PTFE Sheets (Modified Teflon Sheets)
Modified PTFE sheets improved performance over conventional PTFE,
Reduced product loss and emissions. Excellent bolt torque
retention, unique manufacturing process minimizes cold flow
problems typical of skived and expanded PTFE Sheets.
Pure PTFE sheet advantages:
Reduced creep relaxation;
Chemical resistant; Cost saving and Tighter seal.
Pure PTFE sheet application:
Made for sealing gaskets
Electrical insulation parts, lining and oil less lubricating
Withstands a wide range of chemicals for extended service life in a
wide variety of applications.
Pure PTFE sheet Stock Dimention:
|150X150||1.0~30||± 0.30~± 0.50|
|250X250||1.0~30||± 0.30~± 0.50|
|300X300||1.0~30||± 0.30~± 0.50|
|450X450||1.0~30||± 0.30~± 0.50|
|600X600||1.0~30||± 0.30~± 0.50|
|800X800||1.0~30||± 0.30~± 0.50|
|1000X1000||1.0~30||± 0.30~± 0.50|
|1200X1200||1.0~30||± 0.30~± 0.50|
|1500 X 1500||1.0~35||± 0.30~± 0.60|
|2000 X 2000||1.0~5.0||± 0.20~± 0.30|
|2500 X 2500||1.0~5.0||± 0.20~± 0.30|